Wet drywall in Salt Lake City
Tom Hanks, owner, 24/7 Express Handyman Service · Updated September 2026
24/7 Express Handyman Service replaces wet drywall in Salt Lake City. 24-48 hours is EPA's window to dry water-damaged areas and items to prevent mold growth. (EPA: A Brief Guide to Mold, Moisture and Your Home) 4,225 feet is the elevation of the National Weather Service's official climate station at Salt Lake City International Airport, whose 1991-2020 climate normals record a January average low temperature of 24.2 degrees Fahrenheit and 12.7 inches of average January snowfall, with at least an inch of new snow falling on about 7.6 days in a typical January. (NOAA NCEI U.S. Climate Normals 1991-2020 (Monthly) — Salt Lake City Intl AP, UT) In the Salt Lake City & Millcreek zone, scheduled work is $95/hour with a 2-hour minimum and no dispatch fee, plus a $15 fuel surcharge.
How much does a wet drywall job cost in Salt Lake City?
From $205
Wet drywall in Salt Lake City starts at $205: the 2-hour minimum at $95/hour ($190) plus the $15 fuel surcharge, with no dispatch fee. Time past 2 hours is billed in 30-minute steps. Larger parts are billed at cost plus 25%.
Call now
Salt Lake City & MillcreekAnswered 24/7 by Tom or his dispatcher.
Dispatch fee $199–$349 by time of day, due on arrival, covering the first hour on site. After that, $150/hour in 30-minute steps. Fuel surcharge $15. Supplies fee $50. Full price sheet and estimator
Typical arrival in the Salt Lake City & Millcreek zone: 60–90 minutes.
24/7 Express Handyman Service confirms the address, the zone rate and the dispatch fee, and takes a card, before rolling.
What 24/7 Express Handyman Service does on site
- Soaked or stained drywall cut out past the damage line so the cavity can be inspected and dried
- Insulation and framing checked, and the cavity left open to dry before closing up
- New drywall hung, taped, textured and primed to match the surrounding wall
How it works
- Confirm the leak source is stopped before any drywall is replaced
- Cut out damaged drywall and wet insulation, and dry the open cavity
- Hang, tape, finish and prime new drywall once framing is dry
- Referred out: the leak itself goes to a licensed plumber or roofer, wet electrical boxes or wiring to a licensed electrician, and mold beyond a small patch to a remediation contractor
What happens next
- The written scope and price come first; drywall goes back only after the leak is fixed and the cavity is dry.
- Photograph the damage before anything is moved and keep every receipt; 24/7 Express Handyman Service provides an itemised invoice your insurer may ask for. The dispatch fee and job cost are paid by you on the day.
In Salt Lake City
Salt Lake City has an estimated 30,000 brick homes built before 1970 that the city classifies as unreinforced masonry construction, and its Fix the Bricks program provides financial assistance to retrofit these older homes against earthquake damage. (Salt Lake City's Fix the Bricks Program — SLC.gov Blog) A pilot 2016 grant of over $700,000 funded the retrofit of 29 Salt Lake City homes, while a 2019 grant of more than $5 million aims to retrofit another 200 homes. (Fix The Bricks! Fortifying Salt Lake City, Utah — FEMA Case Study)
Calls come from around University of Utah, Foothill Drive, Research Park, the benches, up by the U.
Every job 24/7 Express Handyman Service takes on is under $3,000 including labor, materials and any change orders (Utah Code §58-55-305); a change that would push a job over that line is referred to a licensed contractor, not written up as a second job. plumbing, electrical, HVAC, gas appliance / combustion system work is referred to a licensed trade.
Sources
- EPA: A Brief Guide to Mold, Moisture and Your Home — retrieved 2026-09-23
- NOAA NCEI U.S. Climate Normals 1991-2020 (Monthly) — Salt Lake City Intl AP, UT — retrieved 2026-09-19
- Salt Lake City's Fix the Bricks Program — SLC.gov Blog — retrieved 2026-09-19
- Fix The Bricks! Fortifying Salt Lake City, Utah — FEMA Case Study — retrieved 2026-09-19