Keypad lock in Millcreek
Tom Hanks, owner, 24/7 Express Handyman Service · Updated September 2026
24/7 Express Handyman Service installs keypad locks in Millcreek. 2-1/8 or 1-1/2 inch door holes and a 2-3/8 or 2-3/4 inch backset are what a Kwikset touchscreen deadbolt is made to fit. (Kwikset 275 Touchscreen Electronic Deadbolt Installation and User Guide) 4,850 feet is the elevation of the NOAA climate station on Salt Lake City's east bench, near Millcreek, whose 1991-2020 climate normals record a January average low temperature of 22.8 degrees Fahrenheit. (NOAA NCEI U.S. Climate Normals 1991-2020 (Monthly) — Salt Lake City E Bench, UT) In the Salt Lake City & Millcreek zone, scheduled work is $95/hour with a 2-hour minimum and no dispatch fee, plus a $15 fuel surcharge.
How much does a keypad lock job cost in Millcreek?
From $205
Keypad lock in Millcreek starts at $205: the 2-hour minimum at $95/hour ($190) plus the $15 fuel surcharge, with no dispatch fee. Time past 2 hours is billed in 30-minute steps. Larger parts are billed at cost plus 25%.
Call now
Salt Lake City & MillcreekAnswered 24/7 by Tom or his dispatcher.
Dispatch fee $199–$349 by time of day, due on arrival, covering the first hour on site. After that, $150/hour in 30-minute steps. Fuel surcharge $15. Supplies fee $50. Full price sheet and estimator
Typical arrival in the Salt Lake City & Millcreek zone: 60–90 minutes.
24/7 Express Handyman Service confirms the address, the zone rate and the dispatch fee, and takes a card, before rolling.
What 24/7 Express Handyman Service does on site
- Installs battery-powered keypad and smart deadbolts in existing door preps, or bores new holes to the lock maker's template.
- Adjusts the strike and latch so the bolt throws fully without the door being pushed or lifted.
- Sets up the master code with the owner and tests every code, the physical key and the battery backup before leaving.
How it works
- The owner picks the lock, and the door thickness, hole size and backset are measured to confirm it fits.
- The door prep, strike alignment and install are priced in writing.
- The lock is installed, the strike is adjusted, and the door is tested from inside and out.
- Referred out: hardwired access systems, doorbell wiring and any new electrical work.
What happens next
- The written scope and price come first; the owner sets or confirms the codes at the end of the visit.
- Photograph the damage before anything is moved and keep every receipt; 24/7 Express Handyman Service provides an itemised invoice your insurer may ask for. The dispatch fee and job cost are paid by you on the day.
In Millcreek
The upper Mill Creek Canyon road closes to vehicle traffic every year on November 1 and does not reopen to cars until late spring, depending on weather and road conditions, restricting motorized access to canyon-area properties through the winter. Dogs must be on-leash at all times in the canyon on even-numbered days, and are allowed off-leash on trails on odd-numbered days. (Mill Creek Canyon — Salt Lake County Parks & Recreation) Millcreek's municipal code prohibits parking a vehicle on any city street when it is snowing or snow is on the street during November, December, January, February, March, and April. (Millcreek Municipal Code §11.20.130, Parking Prohibited When)
Calls come from around Olympus Cove, Millcreek Canyon, the benches.
Every job 24/7 Express Handyman Service takes on is under $3,000 including labor, materials and any change orders (Utah Code §58-55-305); a change that would push a job over that line is referred to a licensed contractor, not written up as a second job. plumbing, electrical, HVAC, gas appliance / combustion system work is referred to a licensed trade.
Sources
- Kwikset 275 Touchscreen Electronic Deadbolt Installation and User Guide — retrieved 2026-09-23
- NOAA NCEI U.S. Climate Normals 1991-2020 (Monthly) — Salt Lake City E Bench, UT — retrieved 2026-09-19
- Mill Creek Canyon — Salt Lake County Parks & Recreation — retrieved 2026-09-19
- Millcreek Municipal Code §11.20.130, Parking Prohibited When — retrieved 2026-09-19