Install ember-resistant vent screens

Tom Hanks, owner, 24/7 Express Handyman Service · Updated September 2026

24/7 Express Handyman Service screens attic and crawl vents in Salt Lake, Park City and Heber. 1/8-inch metal mesh screening over vents helps keep wildfire embers from getting into a house. (Prepare and Protect Your Home | National Interagency Fire Center)

What ember vents costs

Salt Lake City & Millcreekfrom $205
Park City & Summit Countyfrom $225
Heber Valley & Wasatch Countyfrom $225

Ember vents in Salt Lake City & Millcreek starts at $205: the 2-hour minimum at $95/hour ($190) plus the $15 fuel surcharge, with no dispatch fee. Time past 2 hours is billed in 30-minute steps. Larger parts are billed at cost plus 25%.

Full price sheet and estimator

Call now

(801) 999-0827Text photos

Answered 24/7 by Tom or his dispatcher.

24/7 Express Handyman Service confirms the address, the zone rate and the dispatch fee, and takes a card, before rolling.

Quick answers

What size mesh keeps embers out of vents?

Use 1/8-inch metal mesh. The National Interagency Fire Center recommends 1/8-inch metal mesh screening to reduce embers entering vents, and USU Extension gives the same size for attic, eave and foundation vents. Fasten it on every edge so no gaps are left.

Will ember screens block attic airflow?

They reduce it a little, so the screens must stay clean. Fire-district guidance notes that finer mesh needs more maintenance to stay free of debris and that air must keep flowing freely to manage moisture in the attic or crawlspace. Dryer and bath fan exhausts should never be screened over.

What can cover vents if a wildfire is close?

Pre-cut plywood, or aluminum foil folded several layers thick and stapled over the opening. USU Extension suggests covering vent openings this way when a wildfire is threatening. Take the covers off once the threat passes so the attic and crawlspace can breathe again.

Round decorative gable vent set into painted wood siding under a roof peak
Photo: Lvklock, CC BY-SA 3.0

What 24/7 Express Handyman Service does on site

How it works

  1. Every exterior vent is counted and measured, and dryer, bath fan and furnace exhausts are flagged to be left alone.
  2. The screening is priced in writing.
  3. Mesh is installed vent by vent, and each opening is checked afterward to confirm air still moves through it.
  4. Referred out: dryer, bath fan, furnace or water heater exhausts and any change to the attic ventilation design (licensed HVAC or roofing contractor).

When to stop and call

If attic or crawlspace vents are open, torn or missing screens as fire season starts, call. 24/7 Express Handyman Service can close the openings with metal mesh so embers have a harder time getting in.

What happens next

Every job 24/7 Express Handyman Service takes on is under $3,000 including labor, materials and any change orders (Utah Code §58-55-305); a change that would push a job over that line is referred to a licensed contractor, not written up as a second job. plumbing, electrical, HVAC, gas appliance / combustion system work is referred to a licensed trade.

Not urgent? Request a callback

For scheduled work, not tonight's emergency. Read the next morning.

Callback details

Sources

All sources

Call (801) 999-0827Text

Answered 24/7 by Tom or his dispatcher.