Appliance haul in Bonneville Hills
Tom Hanks, owner, 24/7 Express Handyman Service · Updated September 2026
24/7 Express Handyman Service hauls away old appliances in Bonneville Hills. 40 CFR Part 82, Subpart F sets federal disposal rules for household refrigerators, freezers and window air conditioners. (Stationary Refrigeration Safe Disposal Requirements | US EPA) 1300 South and 2100 East form a commercial node, and the majority of that node is located in the Bonneville Hills neighborhood. (Bonneville Hills Neighborhood | Council District 6 (Salt Lake City)) In the Salt Lake City & Millcreek zone, scheduled work is $95/hour with a 2-hour minimum and no dispatch fee, plus a $15 fuel surcharge.
How much does appliance haul-away cost in Bonneville Hills?
From $205
Appliance haul-away in Bonneville Hills starts at $205: the 2-hour minimum at $95/hour ($190) plus the $15 fuel surcharge, with no dispatch fee. Time past 2 hours is billed in 30-minute steps. Larger parts are billed at cost plus 25%. The landfill or transfer-station fee is added at cost, from the receipt. To have it done now, the $100 rush fee brings the truck within 1 hour. Prices as of September 2026.
Call now
Salt Lake City & MillcreekAnswered 24/7 by Tom or his dispatcher.
Scheduled work is $95/hour with a 2-hour minimum, plus the $15 fuel surcharge, and no dispatch fee. Emergency calls are priced differently: see the price sheet.
Arrival within 24 hours. Rush: add $100 and the truck drops everything and heads straight over, arriving within 1 hour.
In Bonneville Hills
Bonneville Hills is a predominantly single-family residential neighborhood closest to Foothill Village, a semi-regional shopping center, and its streetscapes resemble older East Bench neighborhoods, with uniform home setbacks and extensive street trees. (Bonneville Hills Neighborhood | Council District 6 (Salt Lake City)) The Bonneville Hills neighborhood consists of predominantly single-family homes built during the middle of the 20th century. (East Bench Master Plan (Salt Lake City Planning Division, 2017)) The Salt Lake City segment of the Wasatch fault generates large earthquakes of about magnitude 7 on average every 1,350 years, and the most recent was about 1,300 years ago. (Maps Show Potential Geologic Effects of a Magnitude 7 Earthquake | Utah Geological Survey) A brick building with rows of bricks turned endways every five to six rows may be unreinforced masonry, a pattern once used to add strength before steel reinforcing was required. (Unreinforced Masonry | Earthquakes (Utah Division of Emergency Management)) Utah updated its building codes in the 1970s to outlaw construction of new unreinforced masonry buildings, so URM buildings are typically older structures. (Unreinforced Masonry | Earthquakes (Utah Division of Emergency Management))
Calls come from around Foothill Village, Anderson-Foothill Library, 13th and 21st.
- County
- Salt Lake County
- ZIP codes
- 84108
- Zone and arrival
- Salt Lake City & Millcreek: within 24 hours, or 1 hour with the $100 rush fee
In the Salt Lake City & Millcreek zone
From Salt Lake City's east side and Millcreek, appliances go to the Salt Lake Valley Landfill, which charges $20 for each Freon-containing unit and removes the refrigerant under federal rules before recycling. Washers are taken at its flat rate or per ton rate.

What 24/7 Express Handyman Service does on site
- Hauls refrigerators, freezers, washers, dryers, window air conditioners and other appliances once they are unplugged and free of water and gas lines.
- Tapes doors shut, coils cords and hoses, and moves each unit upright on an appliance dolly over padded floors.
- Delivers refrigerators and freezers to a facility that handles refrigerant, with the disposal fee billed at cost from the receipt.
How it works
- Say which appliances are going, which floor they are on, and whether each one is still connected.
- Get a written scope and price, with disposal added at cost from the receipt.
- On the day, plug-in units are unplugged, the path is padded, and each appliance is strapped to a dolly, carried out and tied down.
- Referred out: gas dryers and ranges are disconnected and capped by a licensed gas fitter or plumber, hard-wired units by a licensed electrician, and dishwashers or plumbed ice makers by a licensed plumber before pickup.
What happens next
- The written scope and price come first; the landfill or transfer-station fee is added at cost from the receipt, and nothing is hauled until you approve the scope.
- Photograph the damage before anything is moved and keep every receipt; 24/7 Express Handyman Service provides an itemised invoice your insurer may ask for. The dispatch fee and job cost are paid by you on the day.
Every job 24/7 Express Handyman Service takes on is under $3,000 including labor, materials and any change orders (Utah Code §58-55-305); a change that would push a job over that line is referred to a licensed contractor, not written up as a second job. plumbing, electrical, HVAC, gas appliance / combustion system work is referred to a licensed trade.
Sources
- Stationary Refrigeration Safe Disposal Requirements | US EPA — retrieved 2026-09-24
- Bonneville Hills Neighborhood | Council District 6 (Salt Lake City) — retrieved 2026-09-23
- Commercial Dumping | Wasatch County, UT — retrieved 2026-09-24
- Pricing - Landfill | Salt Lake County — retrieved 2026-09-24
- Materials Accepted - Landfill | Salt Lake County — retrieved 2026-09-24
- Summit County Landfills | Summit County, UT — retrieved 2026-09-24
- Transfer Station Information | Wasatch County, UT — retrieved 2026-09-24
- East Bench Master Plan (Salt Lake City Planning Division, 2017) — retrieved 2026-09-23
- Maps Show Potential Geologic Effects of a Magnitude 7 Earthquake | Utah Geological Survey — retrieved 2026-09-23
- Unreinforced Masonry | Earthquakes (Utah Division of Emergency Management) — retrieved 2026-09-23
Water still coming? Door that won't lock?
(801) 999-0827Answered 24/7 by Tom or his dispatcher. 24/7 Express Handyman Service confirms the address, the zone rate and the dispatch fee, and takes a card, before rolling.