Spring startup in Olympus Cove

Tom Hanks, owner, 24/7 Express Handyman Service · Updated September 2026

24/7 Express Handyman Service starts up sprinklers in Olympus Cove. Up to 25,000 gallons of water can be lost over a six-month irrigation season to cracked pipes and broken sprinkler heads. (Sprinkler Spruce-Up | US EPA WaterSense) From the mid-1930s to the 1960s, suburban growth expanded massively in Millcreek, making it a prime location for starter-home subdivisions, and World War II and Korean War veterans began buying property in the Canyon Rim and Olympus Cove area. (History | Millcreek, UT) In the Salt Lake City & Millcreek zone, scheduled work is $95/hour with a 2-hour minimum and no dispatch fee, plus a $15 fuel surcharge.

How much does a spring startup job cost in Olympus Cove?

From $205

Spring startup in Olympus Cove starts at $205: the 2-hour minimum at $95/hour ($190) plus the $15 fuel surcharge, with no dispatch fee. Time past 2 hours is billed in 30-minute steps. Larger parts are billed at cost plus 25%.

See the full price sheet and estimate your own job

Call now

Salt Lake City & Millcreek

(801) 999-0827Text photos

Answered 24/7 by Tom or his dispatcher.

Dispatch fee $199–$349 by time of day, due on arrival, covering the first hour on site. After that, $150/hour in 30-minute steps. Fuel surcharge $15. Supplies fee $50. Full price sheet and estimator

Typical arrival in the Salt Lake City & Millcreek zone: 6090 minutes.

24/7 Express Handyman Service confirms the address, the zone rate and the dispatch fee, and takes a card, before rolling.

Pop-up lawn sprinklers spraying a lawn during a zone run
Photo: Ildar Sagdejev (Specious), CC BY-SA 3.0

What 24/7 Express Handyman Service does on site

How it works

  1. Open the irrigation supply slowly so pressure builds gradually and leaks show up early
  2. Flush the last head on each line, then run zones one at a time and flag every problem
  3. Replace heads and fix leaks on the sprinkler lines past the zone valves, then re-run each zone to confirm coverage
  4. Referred out: the annual backflow assembly test goes to a certified backflow tester, mainline or shutoff valve leaks go to a licensed plumber, and controller wiring goes to a licensed electrician

What happens next

In Olympus Cove

Updated FEMA work maps designate the floodplain along Neff's Creek in Olympus Cove as an active alluvial fan, a fan-shaped area where streams deposit silt, sand, gravel, boulders and woody debris and that is prone to sudden, unpredictable flood events. (Neff's Creek Floodplain Info | Millcreek, UT) Homes along the Wasatch Front foothills in Olympus Cove sit within a classic wildland urban interface zone, where higher wildfire exposure calls for extra precautions such as defensible space, ignition-resistant construction and vegetation management. (House Bill 48: What It Means for Millcreek Residents (Millcreek WUI FAQ)) Millcreek planners describe Mount Olympus as having significant and well-known sensitive lands, including debris flow areas, slopes greater than 30 percent, a significant avalanche path, several alluvial fans and significant floodplains. (Minutes of the Millcreek Planning Commission, February 28, 2024)

Calls come from around Mount Olympus, Neff's Canyon, Churchill Junior High School.

More about spring startup

Every job 24/7 Express Handyman Service takes on is under $3,000 including labor, materials and any change orders (Utah Code §58-55-305); a change that would push a job over that line is referred to a licensed contractor, not written up as a second job. plumbing, electrical, HVAC, gas appliance / combustion system work is referred to a licensed trade.

Sources

All sources

Call (801) 999-0827Text

Answered 24/7 by Tom or his dispatcher.